VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-10
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-30-2017, 11:24 PM
SeanM SeanM is offline
 
Join Date: Feb 2017
Location: Utah
Posts: 29
Default Riveting F-1055 rudders stop skin stiffeners

Emp page 10-20 Step 7- "... Rivet the stiffeners to the F-1056 rudder stop brace using AN470AD4-4 rivets"

I am not sure how to reach these 4 rivets. My double offset set isn't long enough (or offset enough) for my gun to clear the longerons. The squeezer can't reach it either.

How have others gotten to these rivets? I see Aircraft Spruce has a 10-1/2" length 1/8" straight set. I'm thinking this may be the way to go--if it'll clear the longerons that is. I figured it would be wise to ask here first. Thoughts?

Thanks

Pictured are the holes in question. I have rivets in two of the four the holes, one on each side:

Reply With Quote
  #2  
Old 10-31-2017, 07:55 AM
rvanstory's Avatar
rvanstory rvanstory is offline
 
Join Date: Dec 2016
Location: New Braunfels
Posts: 443
Default

If I remember right, I was able to get squeezer on two inside rivets. Blind riveted the other two for reasons you mentioned.
__________________
Randy Vanstory
Flying RV10 - N783V
2021 Sun N Fun Reserve Grand Champion
2021 Oshkosh Bronze Lindy

1st Flight 08/20/2020
Donation Happily Made 2021
Reply With Quote
  #3  
Old 10-31-2017, 11:47 AM
BrianDC's Avatar
BrianDC BrianDC is offline
 
Join Date: Mar 2016
Location: Northern VA
Posts: 289
Default

Not sure if different squeezers have different dimensions, but I was able to get my squeezer onto all of those rivets using a 1-1/2" yoke. (It came with the squeezer kit I got from ATS). It was tight and remember that trying to trigger the squeezer while holding it upside down was "fun" but it worked.

Not sure if that really helps your situation out however.
__________________
Brian Lester
RV10 Slow Build - #41778
Finish Kit - in progress
RV10builder.com
KVKX / KHEF
Reply With Quote
  #4  
Old 10-31-2017, 02:02 PM
flion's Avatar
flion flion is offline
 
Join Date: Dec 2007
Location: Flagstaff, AZ
Posts: 2,708
Default

I had to go back and look at my log. A friend had an 'alligator' style pneumatic squeezer, which did the trick.
__________________
Patrick Kelley - Flagstaff, AZ
RV-6A N156PK - Flying too much to paint
RV-10 14MX(reserved) - Fuselage on gear
http://www.mykitlog.com/flion/
EAA Technical Counselor #5357
Reply With Quote
  #5  
Old 10-31-2017, 02:10 PM
RandyAB RandyAB is offline
 
Join Date: May 2016
Location: St Albert, Alberta, Canada
Posts: 534
Default

I used a hand squeezer. Being #4 rivets it took a bit of work to squeeze them but it was doable.
__________________
______________________
Randy P.
1st time builder
RV10 - QB wings and fuse. Working on cabin top
St. Albert, Alberta, Canada
Reserved:C-GRPY
Reply With Quote
  #6  
Old 11-02-2017, 01:00 PM
ppilotmike's Avatar
ppilotmike ppilotmike is offline
 
Join Date: Jan 2010
Location: Denver, CO
Posts: 2,014
Default

Pneumatic squeezer.
__________________
Mike Rettig
EAA Chapter 301 www.eaa301.org
VAF Dues Current
RV-10 - Working on engine / prop installation
http://www.mykitlog.com/users/index....ig&project=803
F-14 (Pedal Plane - Daughter's Project) "Flying"
https://www.youtube.com/watch?v=zKCyX2FXrlw
Reply With Quote
  #7  
Old 11-03-2017, 08:53 AM
AZSteve053 AZSteve053 is offline
 
Join Date: Jan 2013
Location: Payson, Arizona
Posts: 18
Default

How about an Alligator rivet squeezer - comes in pretty handy lots of places - borrow or rent if not wanting to invest.
Reply With Quote
  #8  
Old 11-03-2017, 10:42 AM
SeanM SeanM is offline
 
Join Date: Feb 2017
Location: Utah
Posts: 29
Default

Alligator squeezers seem like they could be super useful, maybe just a tad pricey though. I would like to add one to my wishlist but will need to research them a bit more, any recommendations?

No way I can get my existing bulky pneumatic squeezer in there. The straight set from AS should arrive today and I will give that a shot. If that doesn't work I may look into a hand squeezer or just biting the bullet and getting an alligator squeezer.
Reply With Quote
  #9  
Old 11-03-2017, 11:51 AM
RandyAB RandyAB is offline
 
Join Date: May 2016
Location: St Albert, Alberta, Canada
Posts: 534
Default

Quote:
Originally Posted by SeanM View Post
Alligator squeezers seem like they could be super useful, maybe just a tad pricey though. I would like to add one to my wishlist but will need to research them a bit more, any recommendations?

No way I can get my existing bulky pneumatic squeezer in there. The straight set from AS should arrive today and I will give that a shot. If that doesn't work I may look into a hand squeezer or just biting the bullet and getting an alligator squeezer.
I have both a pneumatic and a hand squeezer. There have been a few places in the build so far (trim tab hinges (ie: AN3 rivets in tight places)) where I prefer the hand squeezer. It gets into tighter places and it's easier to control overall. AN4 rivets take a bit more muscle but can be done in small batches. It will be much less expensive than adding another pneumatic squeezer.
__________________
______________________
Randy P.
1st time builder
RV10 - QB wings and fuse. Working on cabin top
St. Albert, Alberta, Canada
Reserved:C-GRPY
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:13 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.