I've attached my tip-up canopy using Sikaflex. My thinking was that I needed to have an area of horizontal plexiglas at the leading edge to give the sika something to bond to. The profile at the centre is something like this:
https://vansairforce.net/community/attachment.php?attachmentid=1003&stc=1&d=1596982637
Now that I'm ready to do the transition from aluminum to plexiglas, I'm looking at Van's take on the profile:
https://vansairforce.net/community/attachment.php?attachmentid=1004&stc=1&d=1596982916
If I sand off some of the plexiglas and add some microballoons, does this profile seem like it would work?
https://vansairforce.net/community/attachment.php?attachmentid=1005&stc=1&d=1596983001
https://vansairforce.net/community/attachment.php?attachmentid=1003&stc=1&d=1596982637
Now that I'm ready to do the transition from aluminum to plexiglas, I'm looking at Van's take on the profile:
https://vansairforce.net/community/attachment.php?attachmentid=1004&stc=1&d=1596982916
If I sand off some of the plexiglas and add some microballoons, does this profile seem like it would work?
https://vansairforce.net/community/attachment.php?attachmentid=1005&stc=1&d=1596983001