VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 12-30-2008, 12:01 PM
Bevan Bevan is offline
 
Join Date: Sep 2007
Location: BC
Posts: 1,700
Default How to open Andair gacolator?

Seems silly but I cannot remove the bowl of my andair gascolator. Seems that it or my brain has seized. I'm turning the bowl to the left when looking at it from the bowl side. Is this correct?

I have the square part of the body in the vise. The bowl is tapered so I can't grip it with any tool but my hand.

I've also tried turning the ring but it seems to have stops so it only moves 1/4 inch but then stops dead. Looks like the bowl screws onto the ring.

Andair's website FAQ, contact and documents pages are inop today.

Is there a trick or any suggestions? I bought this used, have no paperwork or prior experience with it and want to inspect the whole thing prior to install.

Bevan
Feeling useless today
Reply With Quote
  #2  
Old 12-30-2008, 01:05 PM
Andy Hill's Avatar
Andy Hill Andy Hill is offline
 
Join Date: Dec 2005
Posts: 976
Default

It's a bayonet

Loosening the outside screw ring (which would be wire locked in place) allows the bowl to be pushed up a little, turned say 10? 30? degrees and then pulled off (down)... I think

Hope that helps...

Andy & Ellie Hill
RV-8 G-HILZ
Reply With Quote
  #3  
Old 12-30-2008, 03:16 PM
Walt's Avatar
Walt Walt is offline
 
Join Date: Aug 2005
Location: Dallas/Ft Worth, TX
Posts: 5,950
Default

I used to have one, the bowl nut can be a bear to get off especially if it was over-tightened with no anti-seize. Sounds like you are doing it correctly, the retainer screws off CCW looking at it from the top. The perfect tool to remove would be a cannon plug pliers but a large slip joint pliers with a rag should also work.
__________________
Walt Aronow, DFW, TX (52F)

EXP Aircraft Services LLC
Specializing in RV Condition Inspections, Maintenance, Avionics Upgrades
Dynamic Prop Balancing, Pitot-Static Altmeter/Transponder Certification
FAA Certified Repair Station, AP/IA/FCC GROL, EAA Technical Counselor
Authorized Garmin G3X Dealer/Installer
RV7A built 2004, 1900+ hrs, New Titan IO-370, Bendix Mags
Website: ExpAircraft.com, Email: walt@expaircraft.com, Cell: 972-746-5154

Last edited by Walt : 01-02-2009 at 09:02 PM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:30 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.