Originally Posted by gblwy
Thanks, Tony, for the fast response. I'll give it a try. I guess I need to dismantle the control board module to access the capacitor.
It is an electrolytic capacitor that is polarity specific so be sure you install the new one with the leads located to the proper positions on the pcb.
Opinions, information, and comments, are my own unless stated otherwise.
You are personally responsible for determining the suitability of any tips, ideas, etc. obtained from any post I have made in this forum.
Formerly of Van's Aircraft Engineering Prototype Shop
FAA/DAR, A&P, EAA Technical Councelor
RV-6A (aka "Junkyard Special ")