Strike69
Active Member
The drawing below is my planned electrical system - VP-X, Garmin G3X EFIS, and dual p-mags. The stick mixer takes the various stick functions from both cockpits and provides one signal (for each function) to the system.
The starter system is a little non-traditional. I am planning a stick starter button instead of the traditional keyed starter. To provide a margin of safety to keep the prop from turning unintentionally/inadvertently, I designed a relay to require both the key to be in and turned to both AND the start push energized and depressed.
Any comments, gotchas, or things i have missed are welcome.
Thanks
Strike
The starter system is a little non-traditional. I am planning a stick starter button instead of the traditional keyed starter. To provide a margin of safety to keep the prop from turning unintentionally/inadvertently, I designed a relay to require both the key to be in and turned to both AND the start push energized and depressed.
Any comments, gotchas, or things i have missed are welcome.
Thanks
Strike