LittleJoeA
Well Known Member
Good Morning All,
I am working on 31B-15, Step 7, sorting out the wiring for the pitch servo.
The issue is the wh-695 (gry/prp) wire.
There is no gry/prp wire in the harness.
The schematic shows that wire is gry/prp and comes from pin 23 of the options plug.
Pin 23 of the options plug goes to a white wire marked F695
I am assuming that the white wire is correct.
I have notified Van's.
I am working on 31B-15, Step 7, sorting out the wiring for the pitch servo.
The issue is the wh-695 (gry/prp) wire.
There is no gry/prp wire in the harness.
The schematic shows that wire is gry/prp and comes from pin 23 of the options plug.
Pin 23 of the options plug goes to a white wire marked F695
I am assuming that the white wire is correct.
I have notified Van's.