When I did my step installation I machined aluminum blocks that provided a clamping structure for the step bolt to work against. I detailed the installation on our web site. I've had enough folks ask to make these machined bushings available, so we are adding them to our available products at TCW Technologies.
Here's a direct link to the details, scroll to the bottom of the page for the step bushings:
http://www.tcwtech.com/RV-10-construction-project.htm
For those that want to see our web album for our RV-10 build here's the link:
http://picasaweb.google.com/rcnewman64
The bushings and other little things we've done are in the 'fuselage-custom parts' sub-album
Bob Newman #40176
TCW Technologies, LLC.
Here's a direct link to the details, scroll to the bottom of the page for the step bushings:
http://www.tcwtech.com/RV-10-construction-project.htm
For those that want to see our web album for our RV-10 build here's the link:
http://picasaweb.google.com/rcnewman64
The bushings and other little things we've done are in the 'fuselage-custom parts' sub-album
Bob Newman #40176
TCW Technologies, LLC.
