I bought our plane about 3.5 years ago. Since then we have been to OSH 3 times and put several hundred hours on her. After some time, I noticed a slight light gap showing between the canopy and the part it rests on on the left side near the panel when flying. Over the last year, the gap seems to be getting a little bigger. I don't think the canopy is suddenly going to depart the plane but wanted advice on how to close the gap, if possible. I've read many threads about how tedious and frustrating it is to adjust the canopy position while building and thought some of you might have a solution. The pictures show the canopy from each side both open slightly and closed and locked. Also a picture of light showing through the gap.
I've never tried to put pictures on a post so I hope I followed the directions correctly. Thanks
I've never tried to put pictures on a post so I hope I followed the directions correctly. Thanks
Last edited: