How important is it that the elevator close out tabs be bent exatly 1/32 over the bend line. As you can see in the pictures, it is closer to 1/16 in on the trailing edge. When looked at from the bottom of the skin, there is also a bit or waviness. Is this a redo? The top one is not much better.
https://eaabuilderslog.org/?blprojentry&proj=7gbEJNhMU&e=7pcsNqaZA&listcat=&sid=
https://eaabuilderslog.org/?blprojentry&proj=7gbEJNhMU&e=7pcsNqaZA&listcat=&sid=