CharlieWaffles
Well Known Member
I've been experiencing this issue and even went so far as to order some of the main leg stiffeners to install. As I was working my way through my annual I found my nose wheel was now only taking about 18 pounds of force to rotate versus the 26 lbs Vans recommends in the plans. Those belleville washers definitely smoothed out (I had pre-sanded them a bit too). I also found my nose wheel was under inflated as well. Hopefully that will be the shake I've been feeling.
Just to go back to what Mike started the thread with, be sure to check out the mechanics of the wheels to see if something else is going on.
Just to go back to what Mike started the thread with, be sure to check out the mechanics of the wheels to see if something else is going on.