VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-03-2021, 06:52 PM
Wingit Wingit is offline
 
Join Date: Oct 2019
Location: Miranda,Ca
Posts: 50
Default Elevator counter weights confusion?

I have checked out all of the different ideas about how to make sure the bolts holding counter weights do not become loose, now I am confused.
1 is it possible to achieve proper toque on the fastener holding counter weight.
2 is tight as possible the right torque, if so, will red loc-tite keep the fasteners from coming loose.
3 if you go the nut plate version and there is a void where the nuts and washers were should that be fill with something like RTV to fill the void and anchor the nut plate
4 if you use the nut plate should you stop torquing when the bolt starts to embed in the weight
Thanks
Dave
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:23 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.