VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 12-18-2009, 01:47 PM
jerryab jerryab is offline
 
Join Date: Dec 2008
Location: Northwest Arkansas
Posts: 40
Default Manifold gauge leaking down?

On a cross country flight this week in my RV6A, I noticed my manifold pressure was down to 15 in, but I was still flying at cruise speed. I added full throttle and it resulted in no increase in mp. It had been fine on my departure. When I returned it was fine on take-off, but leaked down again after 20 minutes. I've recently replace the transducer. This is Van's guage. Any thoughts on where I should look. I've already checked the lines at the connnections. This is an O-320 D1A.

Jerry
N331RA
Reply With Quote
  #2  
Old 12-19-2009, 11:31 AM
Steve Steve is offline
 
Join Date: Jan 2005
Location: Roy, Utah
Posts: 1,174
Default

My MP gage behaved identically. I could get the gage to go full deflection when I keyed the mike. Then it would go full deflection when I turned on the master switch. Cycle the master and the gage would stay at zero, and never work at all again.
I pulled the whole Vans MP system from the plane and replaced it with an old fashioned mechanical/pneumatic gage and copper tube plumbed directly into #3 cylinder head.
__________________
Five Sierra Fox
RV-9A
Utah
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:53 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.