FlyBoy8
Active Member
The instructions say the doublers should overhang the rear spar by about an inch but if they are cut to 26" long as described they don't overhang at all.
I'm confused again.
I just looked at the plans again. Its difficult to see the doublers in the drawing but it does show that they don't really overhang the rear spar at all and also reiterates the length of the doubler as 26"
I'm confused again.
I just looked at the plans again. Its difficult to see the doublers in the drawing but it does show that they don't really overhang the rear spar at all and also reiterates the length of the doubler as 26"
Last edited: