Guys,
OK here is my latest question. So I went to time my right mag and can't get it to the proper spot. As I try to rotate the mag to the left CCW as part of the timing process the mag hits the attachment foot. I chamfered the foot but still need to go a bit further.
https://photos.google.com/share/AF1...?key=bW41dmNWMWZrSUlsSGpsNmNWZmx2Y0RpSkVCOHVn
To be clear when I line up the red line to time the gears and have my prop at 25 before TDC. The Bendix 1200 interferes with the top attachment lug which prevents it from rotating enough to properly time.
Is there anyway to change the timing verse the mag body alignment?
Thanks Drippy
40644
Going to the airport Monday!!!
OK here is my latest question. So I went to time my right mag and can't get it to the proper spot. As I try to rotate the mag to the left CCW as part of the timing process the mag hits the attachment foot. I chamfered the foot but still need to go a bit further.
https://photos.google.com/share/AF1...?key=bW41dmNWMWZrSUlsSGpsNmNWZmx2Y0RpSkVCOHVn
To be clear when I line up the red line to time the gears and have my prop at 25 before TDC. The Bendix 1200 interferes with the top attachment lug which prevents it from rotating enough to properly time.
Is there anyway to change the timing verse the mag body alignment?
Thanks Drippy
40644
Going to the airport Monday!!!