430w to 330es

K

kevin O

Well Known Member

• Apr 27, 2016

• #1

Does anyone know the settings on the 330es and 430w to activate the Adsb out with 430w as the gps source just upgraded and can't find the settings. Thanks

 

B

BobTurner

Well Known Member

• Apr 27, 2016

• #2

On the 430W, select "ADSB+" (must have the +) for the RS232 output on the port you are using.

 

K

kevin O

Well Known Member

• Apr 27, 2016

• #3

Thanks. The 330es settings are needed

 

J

jgoehl

Active Member

• Apr 27, 2016

• #4

On the 330Es on the RS232 input needs to set to REMOTE on the channel that you used from the 430W

GPS integrity set to 1E-7
The other two selections on that page can be set to UNK

Also check that the N number is correctly set.

Jeff

 

K

kevin O

Well Known Member

• Apr 27, 2016

• #5

Thanks. Will give it a try