looking for suggestions. I am putting in a new glass panel and I have a separate buss for avionics.
The breakers are-
MFD-5a
Comm-5a
skyfx-3a
xpdr-3a
I have an avionics switch that is rated at 20a. It's not a breaker switch just a standard on/off switch.
I have purchased a 12v 100a continuous duty solenoid from Aircraft Spruce.
Do most people? -
A- just run the avionics power from the main buss through the switch to the avionics breakers
or
B- install the solenoid and run power from the main buss through the solenoid to the avionics breakers using the avionics switch to control it.
The breakers are-
MFD-5a
Comm-5a
skyfx-3a
xpdr-3a
I have an avionics switch that is rated at 20a. It's not a breaker switch just a standard on/off switch.
I have purchased a 12v 100a continuous duty solenoid from Aircraft Spruce.
Do most people? -
A- just run the avionics power from the main buss through the switch to the avionics breakers
or
B- install the solenoid and run power from the main buss through the solenoid to the avionics breakers using the avionics switch to control it.