VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 12-04-2020, 01:15 AM
U2drvr U2drvr is offline
 
Join Date: Oct 2020
Location: Lincoln, CA
Posts: 3
Default Polish now?

Iíll be finishing my empennage kit soon and will have to wait a few months for te fuselage and wing kits. If I plan to polish, would it be beneficial to polish the parts I have done? It seems like it would be easier to do most of the work on the bench, but there are sure to be downsides. Thoughts and opinions?
Reply With Quote
  #2  
Old 12-04-2020, 03:42 AM
trifield trifield is offline
 
Join Date: Apr 2006
Location: melbourne australia
Posts: 11
Default Polish

Doesnt matter when you do it but remove the blue protective plastic as the print will etch into the skin and can be near impossible to polish it out.
Reply With Quote
  #3  
Old 12-04-2020, 07:42 AM
Ralph Inkster Ralph Inkster is offline
 
Join Date: Feb 2008
Location: Calgary, Alberta
Posts: 1,249
Default

Not a great idea to polish now if your ultimate plan is to paint the plane later.
__________________
Ralph
built a few RVs, rebuilt a few more, hot rodded more, & maintained/updated a big bunch more
Reply With Quote
  #4  
Old 12-04-2020, 08:02 AM
Snowflake's Avatar
Snowflake Snowflake is offline
 
Join Date: Oct 2009
Location: Sidney, BC, Canada
Posts: 4,114
Default

U2drvr - welcome to VAF!

If you're planning on a polished airplane, now would be a good time to start. You'll learn how to polish, and get used to putting aside a block of time on a regular basis to maintain the shine. Keep in mind while you do it that this is only about 10% of the surface area of the airplane... It will take 10x as long to do the rest of it. Regularly.
__________________
Rob Prior
1996 RV-6 "Tweety" C-FRBP (formerly N196RV)
Reply With Quote
  #5  
Old 12-05-2020, 04:42 PM
U2drvr U2drvr is offline
 
Join Date: Oct 2020
Location: Lincoln, CA
Posts: 3
Default

Thanks for the inputs! I'll wait until I'm done with the tail kit. before I decide the exact paint/polish scheme and then start polishing when I have time.
Reply With Quote
  #6  
Old 12-05-2020, 04:57 PM
xblueh2o xblueh2o is offline
 
Join Date: Apr 2011
Location: SF East Bay
Posts: 859
Default

Good advice being offered.
Nothing wrong with polishing now as long as you are mentally prepared that it will need to be done again when you get the forward part of the fuselage built/polished and for sure get the protective plastic off now while it is easy.
__________________
Sam
RV-8 with the Showplanes Fastback conversion
Emp completed except for glass work
Wings completed except for bottom skin and glass work
Fuselage underway
N18451 reserved
Reply With Quote
  #7  
Old 12-05-2020, 05:03 PM
catmandu's Avatar
catmandu catmandu is offline
 
Join Date: Dec 2005
Posts: 937
Default

Pay good money to polish aluminum.

xF/A-18drvr sends.
__________________
Mike C.
Sierra Nevada
RV-6A bought flying

Last edited by catmandu : 12-05-2020 at 05:06 PM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:56 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.