VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-30-2020, 08:14 AM
iamtheari iamtheari is offline
 
Join Date: Nov 2017
Location: ND
Posts: 506
Default Page 22-09 step 4 - remove trailing edge?

This one strikes me as odd. Preceding steps on this page are to cleco the trailing edge into place, cleco and rivet the main ribs to each other, and then rivet the counterbalance to the nose skin. Step 4 is then to remove the trailing edge and "complete the riveting of the aileron," which presumably includes riveting in the trailing edge.

Is there any particular reason to remove the trailing edge at a time when it is the only remaining piece to rivet into the aileron? My inclination is to install it with VHB tape at step 1 on this page, before riveting the main ribs together. Trying to get the trailing edge out and back in, especially with tape on it, after riveting the main ribs seems like it would be a struggle.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:37 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.