Daida
Well Known Member
Hi Folks!
I have a Dynon SV System with a SV-GPS-250 antenna. I also have a ACK E-04 ELT.
I built a test device according to figure 14, Page 9 of the E-04 installation manual.
According to the SV System Setup Page, the SV provides a GPS signal with a Baud-rate at 32800 (-ish, i forgot the exact value and did not take notes, but it is way high).
The E-04 can manage different Baud-Rates and is set to 9600 by the factory setting.
Whilst testing, the LED did not flash but was permanently on.
What does that mean? GPS Signal coming permanently or not at all?
Anyone has the same setup and the same questions/issues?
i will ask the Dynon guys on Thursday during my visit of the AERO exhibition in Friedrichshafen (Germany).
i will also contact the ACK guys via Email.
i will post their answers here later on, but maybe one of you have the solution on hand anyway?
Thanks for your inputs!
cheers!
I have a Dynon SV System with a SV-GPS-250 antenna. I also have a ACK E-04 ELT.
I built a test device according to figure 14, Page 9 of the E-04 installation manual.
According to the SV System Setup Page, the SV provides a GPS signal with a Baud-rate at 32800 (-ish, i forgot the exact value and did not take notes, but it is way high).
The E-04 can manage different Baud-Rates and is set to 9600 by the factory setting.
Whilst testing, the LED did not flash but was permanently on.
What does that mean? GPS Signal coming permanently or not at all?
Anyone has the same setup and the same questions/issues?
i will ask the Dynon guys on Thursday during my visit of the AERO exhibition in Friedrichshafen (Germany).
i will also contact the ACK guys via Email.
i will post their answers here later on, but maybe one of you have the solution on hand anyway?
Thanks for your inputs!
cheers!