Plane power enable plug pins?

Does anyone know the part number for the pins that go in the 3 wire connector in the back of the plane power 14 alternator? I pulled one of the wires and would like to just replace the pin. Plane power is being as helpful as they can, but they can only send me the entire plug with the 10 foot lead. Id like to avoid a splice or having to rerun the entire lead back into the cockpit if able for a simple repair. I'm willing to buy the entire connector kit as well if anyone has a source for one that isn't already assembled. Thanks.

You can remove and replace the pins

This?

https://www.driftmotion.com/category-s/1847.htm

Buy the little rubber plugs to fixate the wires where they exit the back of the plug. Or use some silicone. Or you'll be sorry

Perfect. Thanks guys. It appears that connector uses the 90-II pins.