I have a factory new YIO540-D4A5 in my RV-10 that was completed last year. I have been having numerous issues with the motor from day 1…long story…
The short story is I’m looking for a very experienced Lycoming shop to troubleshoot issues with the power output of the motor, possible cylinder glazing and a leaking front prop seal. The shop needs to have the capability to hone the cylinders if necessary. I’d really like is a good troubleshooter.
Preferably looking either in the DFW or San Antonio areas, but can expand that if necessary. (I commute between the two)
Lycoming has taken full responsibility for the issues, and it is still under warranty.
Any suggestions will be greatly appreciated!!
Thanks,
Tom
The short story is I’m looking for a very experienced Lycoming shop to troubleshoot issues with the power output of the motor, possible cylinder glazing and a leaking front prop seal. The shop needs to have the capability to hone the cylinders if necessary. I’d really like is a good troubleshooter.
Preferably looking either in the DFW or San Antonio areas, but can expand that if necessary. (I commute between the two)
Lycoming has taken full responsibility for the issues, and it is still under warranty.
Any suggestions will be greatly appreciated!!
Thanks,
Tom