VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 03-22-2021, 12:21 PM
P51Matt P51Matt is offline
 
Join Date: Jun 2011
Location: Lees Summit, MO
Posts: 31
Default GTN650 Power

I am in the process of wiring my panel and I am now on the GTN650. The manual says to use 18 gage wire for the power on the com side. I am having difficulty trying to get the wire into the d-sub pin. Does anyone have a trick to making the wire fit? I am trying to avoid having to trim the inner conductor wires since that would defeat the purpose of having the larger wire.

Thanks,
__________________
Matt German
Lees Summit, Missouri
RV-10QB N142LM: Flying 270+hrs
RV-8 Eventually, working on engine and wiring
Reply With Quote
  #2  
Old 03-22-2021, 12:43 PM
Carl Froehlich's Avatar
Carl Froehlich Carl Froehlich is online now
 
Join Date: Dec 2007
Location: Dogwood Airpark (VA42)
Posts: 2,930
Default

There are three power pins on the GTN-650 for COMM power, two pins for NAV power for just this reason (pins are too small for a #18 wire).

Use #22 wire in each pin, then splice the three comm power to a single #18 wire. The two NAV power wire to a #18 wire as well. Solder and shrink tube.

Be mindful of all the pins that go to ground. Here again use #22 wire and join all at a common ground.

Carl

Last edited by Carl Froehlich : 03-22-2021 at 03:16 PM.
Reply With Quote
  #3  
Old 03-22-2021, 06:12 PM
pilotkms's Avatar
pilotkms pilotkms is online now
 
Join Date: Mar 2007
Location: WARNER ROBINS, GA
Posts: 469
Default

They also make these special pins for that job (the 2 on the far right). Got them from Stein if I recall. Had to call them.

__________________
Keith
RV 7A RV #9700 May 2017
N325KS the Flying K
Built in SoCal KCCB, now in GA @ KPXE
600+ Hours & 7X cross the USA
OSH flyin 2018 & 2019 & Petit Jean 2019
Reply With Quote
  #4  
Old 03-22-2021, 09:06 PM
PilotjohnS PilotjohnS is offline
 
Join Date: Jan 2016
Location: Southwest
Posts: 1,406
Default Just me

Quote:
Originally Posted by pilotkms View Post
They also make these special pins for that job (the 2 on the far right). Got them from Stein if I recall. Had to call them.

Although you can use special contacts that have oversize barrels, I think it would be better to use thinner wires in multiple pins. The multiple pins for power and ground provide a more reliable power source (redundant contacts) and doesnt run the risk of overloading a single contact
__________________
John S

WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.

Dues paid 2021, worth every penny

RV9A- Status:
Tail 98% done
Wings 98% done
Fuselage Kit 98% done
Finishing Kit 35% canopy done for now
Electrical 85% in work
Firewall Forward 5% in work
Fiberglass 0%, thought i was building in metal?
www.pilotjohnsrv9.blogspot.com
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:17 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.