Dynon D-180 TAS Readout
I'm new to the D-180 so patience will be appreciated. During my first flight or two I recall seeing a TAS value displayed in the upper left hand corner (full screen EFIS mode) with an altitude indication. A GNS 430W is my gps source instrument.
After having a GDL-82 installed by my avionics shop, I have lost the TAS reading on the full EFIS screen but still have the altitude reading in the upper left hand corner. I see in the D-180 manual that cycling to the 1/3 HSI function view that there is a TAS readout there. But is there someplace in the setup where I can restore the TAS indication on the full EFIS screen? If so, could you be specific as to exactly how I restore a TAS value on the full EFIS screen..
Last edited by Tcheairs : 04-16-2021 at 07:14 AM.