JeremyL
Well Known Member
So browsing through the threads here and seeing how people tackle the inside of these tubes to protect against corrosion, I decided to do some searching. I was wondering if any of you have heard of or tried the internal frame coating from Eastwood? (Link below) Also can anyone think of a reason not to spray this in the tubes? I’d like to hear your thoughts. Also they have a cool two part epoxy primer that you press a button on the aerosol before using to mix the parts, I’ll link that below as well. Hope you all are doing well and look forward to reading the thoughts/conversation on this.
https://www.eastwood.com/eastwood-internal-frame-coating-14oz-aerosol.html
https://www.eastwood.com/eastwood-s-2k-aerospraytm-epoxy-primer-gray-black.html
https://www.eastwood.com/eastwood-internal-frame-coating-14oz-aerosol.html
https://www.eastwood.com/eastwood-s-2k-aerospraytm-epoxy-primer-gray-black.html