jim miller
Well Known Member
My RV3 has the early crossover exhaust with the two front cylinders tied
together and the two rear together. A very bad idea according to Vetterman.
Anyone still using this set-up and if so how is it working out? Another question concerning bracing the exhaust. It looks like from the hardward that
came with the plane a aluminum angle cross-brace tied the two pipes together near the exit from cowling. Is this standard and any other advice on
RV3 exhaust welcome.
Thanks
Jim Miller
together and the two rear together. A very bad idea according to Vetterman.
Anyone still using this set-up and if so how is it working out? Another question concerning bracing the exhaust. It looks like from the hardward that
came with the plane a aluminum angle cross-brace tied the two pipes together near the exit from cowling. Is this standard and any other advice on
RV3 exhaust welcome.
Thanks
Jim Miller