subpar_bucker
Well Known Member
I was in Sebring FL this week attending some Rotax maintenance courses at Lockwood. On Friday I was lucky enough to catch their RV-12iS during an oil change. I grabbed a bunch of photos and put them in a google photos album:
https://photos.app.goo.gl/3c8v2Sa61HVvDR5o9
There were a couple of things I thought worth noting: there's a piece of tubing attached to the throttle cable a few inches prior to where it attaches to the throttle body. I know of at least one person who has detected a location where their throttle cable was rubbing its way through the powder coating on their plane. I also noticed some RVT on the pitot tubing just aft of the plastic block the rigid portions passed through right behind the propeller hub.
I've also attached a photo of the beautiful layout of the wiring around the fuse box. Mine isn't nearly as pretty as this one!
https://photos.app.goo.gl/3c8v2Sa61HVvDR5o9
There were a couple of things I thought worth noting: there's a piece of tubing attached to the throttle cable a few inches prior to where it attaches to the throttle body. I know of at least one person who has detected a location where their throttle cable was rubbing its way through the powder coating on their plane. I also noticed some RVT on the pitot tubing just aft of the plastic block the rigid portions passed through right behind the propeller hub.
I've also attached a photo of the beautiful layout of the wiring around the fuse box. Mine isn't nearly as pretty as this one!