Originally Posted by DHeal
You can turn OFF the Canopy OPEN alarm and delete the screen indication on the Skyview.
The Read Me pdf file makes it sound like you're stuck with an alarm if you don't have the switch installed... Is it as simple as going into SETUP and turning it off?
Important Notes: Read Me First
NOTE: Canopy Safety Switch and Alarm
This software adds functionality for the Canopy Open Safety Switch alarm, which is intended to notify the pilot if
the canopy is not fully secured prior to takeoff and/or while in flight. This software change will cause an alarm to
activate continuously if the switch is not installed. Van’s strongly recommends aircraft owners purchase and install
the Canopy Open Safety Switch retrofit kit ES-00300 before installing this software and settings update. See SL 16-
11-04 and N 14-05-22.