VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Prev Previous Post   Next Post Next
  #11  
Old 10-24-2016, 05:33 PM
Tony_T's Avatar
Tony_T Tony_T is offline
 
Join Date: Dec 2008
Location: Lacey, WA
Posts: 1,448
Default Stayed home today

Had to stay home from the hangar today because a technician was here most of the day trying to get our new (but inop) fiber optic internet and tv up and running. So I worked in my shop finishing up the new panel pieces. I'm using the 3M D-NOC vinyl carbon fiber overlay.


I know, it's just faux carbon fiber, but I think it looks killer and putting it on is easier than painting anyway. I hope it stays on, if it peels it will be a disaster. I used the primer and did quite a bit of testing. Without the primer it is hard to pull off. With the primer it is really, really hard to pull off.

BTW, those holes for the autopilot knobs are complicated. The knobs kit comes with a template and instructions for making the holes with the panel installed. I don't see how you guys that cut those holes with the panel in the plane got it done. It is a hard job with the panel on the workbench. I read Dave Gamble's blog on that job before starting it and now I am very impressed with his accomplishment.


__________________
Tony
E-LSA RV-12 ULS
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:30 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.