New to the RV10 forum but have owned an RV7 for a few years. I have recently purchased an RV10 with G900X and VP-200. I know that VP-200 is no longer supported. A recent Garmin upgrade to the G900X has broken the data coding to the engine instrument display on the VP-200 and the dreaded Red X's are appearing intermittently on the instrument display on the VP-200 DU. Can these be programmed out of the VP-200 or so that the engine instrument data is not sent to the VP-200 (already displayed on the G900X) or has anyone already worked out an alternative solution?
Regards
Steve
Long Time Lurker
RV7 & RV10 Owner but don't tell my wife.
__________________ Steve B
Torquay, Australia
RV7 and RV10
VAF dues Paid
the VP-200 is all about the engine data to get all the great features of the product. Unless you really need that new Garmin release, I would contact Garmin and get revert back. The automation and safety features of the VP-200 are worth it!
With that said,
contact chad at Vertical Power - Astronics Advanced Electrical Solutions division
920.216.3699 chad.jensen@astronics.com
for details on how to disable engine gauges and red X's.
VP-200
Linear Mode
