rapid_ascent
Well Known Member
I'm trying to understand about the operation of the GAD27 discrete inputs relative to the frequency swap function. The G3X installation manual has the following statement:
COM Freq Swap - Used with a GMA 245/245R audio panel and a connected COM radio to swap the active and standby frequencies on the currently selected COM. The audio panel's selected microphone channel is used to determine which radio receives the frequency swap command.
While I don't have a GMA 245/245R I do have a GTR200 and a GNS430W. I had planned on running a separate wire to these devices for the frequency swap or frequency transfer function. However if there was some way of using a discrete on the GAD27 that would be convenient since I plan to have the GAD27 mounted near my sticks which will have a button assigned to this function.
If anyone could provide some clarification on what this discrete input assignment does that would be very helpful because the paragraph in the install manual isn't very informative to me.
COM Freq Swap - Used with a GMA 245/245R audio panel and a connected COM radio to swap the active and standby frequencies on the currently selected COM. The audio panel's selected microphone channel is used to determine which radio receives the frequency swap command.
While I don't have a GMA 245/245R I do have a GTR200 and a GNS430W. I had planned on running a separate wire to these devices for the frequency swap or frequency transfer function. However if there was some way of using a discrete on the GAD27 that would be convenient since I plan to have the GAD27 mounted near my sticks which will have a button assigned to this function.
If anyone could provide some clarification on what this discrete input assignment does that would be very helpful because the paragraph in the install manual isn't very informative to me.