I fabricated my own from ,063" stainless steel scrap I had. I have an O-320H2AD and the sump is different than others, so the store bought ones wouldn't work. Not very hard to roll your own bracket.
I fabricated my own from ,063" stainless steel scrap I had. I have an O-320H2AD and the sump is different than others, so the store bought ones wouldn't work. Not very hard to roll your own bracket.
That looks great I like the simplicity of just bolting angle clips on for your attachments, but I think the $30 vans bracket will work for my e2a, if not It will be modified to work.
I also ordered MW-3M Rod End Bearing and AN315-3R Jam Nut
SKU: CT BEARING MW-3M
2
Attachment Hardware for Throttle or Mixture Cable
SKU: CT BEARING HWR, CARB
Kinda wish it had similar hardware to your setup tho with a cotterpin
The cost of the AN310 castlenut would double the price of the bag though.
I fabricated my own from ,063" stainless steel scrap I had. I have an O-320H2AD and the sump is different than others, so the store bought ones wouldn't work. Not very hard to roll your own bracket.