VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 09-04-2015, 11:10 PM
Rodney Rodney is offline
 
Join Date: Oct 2012
Location: Friendswood, TX
Posts: 74
Default Need help configuring GTN 625 w Dynon D100

Howdy,

I am hoping for some insight on configuring a GTN 625 to work with a Dynon D100 with an HS34.

Connected pins 10, 29, 48, and 67 on the GTN to pins 23, 11, 25, 13 on Female DB25 on HS34 respectively. Quite sure the connections are correct.

Configured the HS 34 with GAMA GPS, HIGH speed, OUTPUT DATA ON and output speed HIGH

I am at a loss to determine which GTN selection for data IN to use.

Has anyone configured a GTN 625 with the HS34? If so, I would soooo appreciate your GTN settings.
Thanks
Rodney
Reply With Quote
  #2  
Old 09-05-2015, 07:09 AM
rolivi's Avatar
rolivi rolivi is offline
 
Join Date: Feb 2015
Location: Fort Worth
Posts: 542
Default

I would post this to the Dynon support forum. King and the gang are very good about following up on questions there!

I'm getting ready to cable up an AP74, HS34, GX60, and SL30 to my D-100. So I'll probably be putting a post or three over there myself.
__________________
Rob
RV-6A (Purchased)
2021 Dues Paid, of course
Reply With Quote
  #3  
Old 09-05-2015, 08:25 AM
Rodney Rodney is offline
 
Join Date: Oct 2012
Location: Friendswood, TX
Posts: 74
Default

Thanks for the suggestion. I'll do that!
Reply With Quote
  #4  
Old 09-05-2015, 07:27 PM
Ken Harrill's Avatar
Ken Harrill Ken Harrill is offline
 
Join Date: Feb 2005
Location: Columbia, SC
Posts: 51
Default

Check your PMs.
__________________
Ken Harrill
RV-6
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:32 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.