Home > VansAirForceForums

-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Old 02-12-2013, 10:40 AM
Jr Hampton's Avatar
Jr Hampton Jr Hampton is offline
Join Date: Jan 2012
Location: KFYV
Posts: 58

Originally Posted by Mike S View Post
Thank you... Interesting.. trying to avoid pro seal baptism
Donated 12/15/20
-Building RV7 - Quit 2013
-Saving to Buy flyng 6,7,or 9, A model
-Bought flying RV6A-2020
Reply With Quote
Old 02-12-2013, 11:19 AM
ppilotmike's Avatar
ppilotmike ppilotmike is offline
Join Date: Jan 2010
Location: Denver, CO
Posts: 1,990
Default IMHO, the 1 oz Proseal Kit is best..

Vans sells a little 1 ounce kit of proseal, which IMHO worked best for the empennage kit. I ordered 3 of them, then used one for the rudder and one for each elevator/trim tab combo (RV-10). You might be able to get by with less. If you keep them in the fridge and mix then "slightly cold" the work time is more than enough for the trailing edges. You can buy the "can" kit later when you get to your fuel tanks. If you go with QB wings, you might not even do your tanks...
Mike Rettig
EAA Chapter 301
VAF Dues Current
RV-10 - Working on engine / prop installation
F-14 (Pedal Plane - Daughter's Project) "Flying"
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 06:21 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.