When both of my elevators are put into the trail position and the counterbalance arms are perfectly lined up with the horizontal stab, on both sides, my right elevator's trailing edge sits about 3/8" higher than the left.
Is this normal? I know it states in the manual that most likely, both elevator horns will not line up perfectly and one will be further aft than the other, so I'm assuming there is a tolerance that is allowable, but 3/8" seems a bit much to me. Not sure how this is even possible.
Is this normal? I know it states in the manual that most likely, both elevator horns will not line up perfectly and one will be further aft than the other, so I'm assuming there is a tolerance that is allowable, but 3/8" seems a bit much to me. Not sure how this is even possible.