RV6AussieNick
Well Known Member
Hinge pin covers
This is how I made my covers, I riveted and bonded some .050" 2024 t3 that I shaped to suit the contour of the cowling, formed a cover plate out of 2024 t3 .050" drilled the screw locations then riveted some 10/32 floater anchor nuts to attach the cover with shear head screws.
http://rv-6rebuild.blogspot.com.au/ scroll down the page to find the cowling and engine photo's
Sorry I haven't worked out how to post photo's yet.
This is how I made my covers, I riveted and bonded some .050" 2024 t3 that I shaped to suit the contour of the cowling, formed a cover plate out of 2024 t3 .050" drilled the screw locations then riveted some 10/32 floater anchor nuts to attach the cover with shear head screws.
http://rv-6rebuild.blogspot.com.au/ scroll down the page to find the cowling and engine photo's
Sorry I haven't worked out how to post photo's yet.