Does anyone know if the Now out of business Rocky Mountain EMS probes are compatible with other EMS? I will need a new display but would like to keep using the probes as they appear to still be in good working condition.
A number of years ago, I replaced my Rocky Mountain Instruments microMonitor with a Dynon unit. I found it easier to just replace all the probes than try to rework wiring to work with the new unit. I did reuse the fuel flow transducer.
The Dynon pressure transducers supplied in their kit were a very big improvement over the VDO transducers that were used on the RMI engine monitor.
__________________
Gary A. Sobek
NC25 RV-6 Flying
3,400+ hours Where is N157GS Building RV-8 S/N: 80012
To most people, the sky is the limit.
To those who love aviation, the sky is home.
__________________
=========== V e r n. ====
=======
RV-9A complete
Harmon Rocket complete
S-21 wings complete
Victoria, BC (Summer)
Chandler, Az (Winter)
Rocky Mountain EMS
Linear Mode
