The Infinity grips are made for right or left hands. Installing them you “clock” the grip for best fit for you (as in it is turned a little counter clockwise for the right hand, clockwise for the left). You may find this as advantageous - I do.
I installed infinity grips in all three of my RV projects, and will use them again in the next.
Carl
I really like Kevin at Tosten - he bends over backwards to help the community, and that’s worth a lot!
Paul
Actually a tip up 6 !Paul beat me to it, besides Kevin is one of us---flies a 7.
Actually a tip up 6 !
+1 on Kevin !!
I looked at both, chose Tosten. I don't think I saw a huge difference between them, except that:
1, Tosten was a little cheaper when fully loaded with lots of switches.
2, reviews on this site and others are full of raves about both Tosten's quality and customer service.
Nothing bad about Infinity to report. But the positives for Tosten were compelling for me.
And yes, they do both hands. I have a right and a left handed stick in my cockpit, depending on the seat.
The dealbreaker for me was not being able to share a common ground wire on the switched outputs with the Infinity grips.
JD wouldn’t wire it for me that way due to his perceived redundancy risks. He may have changed his position since then, as this was 4 years ago. I called Tosten, asked if they would wire it the way I wanted, they said no worries and the rest is history.
Tom.
When i put the infinity grip in my 4 i removed most of the grounds from the wure bundle so i could have a smaller hole in the stick. Just tied them together.
Every product i've ever owned that has "soft touch finish" has had the soft touch fail eventually. Flaking, gumming up, etc. It's nice when it's new, but doesn't last.I have had two Torsten CS-8s in my RV10 for a little over 3 year and 350 hours and am really happy with them but am curious if anyone else did the “soft touch” option and if it is peeling off?
Had the Infinity grip on the bench, overall length is less than 6"
Had the Infinity grip on the bench, overall length is less than 6"
Here you go