VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 01-31-2014, 02:59 PM
ARJAY ARJAY is offline
 
Join Date: Jan 2014
Location: Evansville, In.
Posts: 30
Default Erratic fuel gage

When I apply power, one gauge needle climbs slowly up and down in a herky-jerky fashion until reaching about half way, then falls back to the peg and stays there no matter what the tank quantity is. would the float/sender cause this or is the gauge shot.
Thanks, RJ.
Reply With Quote
  #2  
Old 01-31-2014, 03:18 PM
GLPalinkas's Avatar
GLPalinkas GLPalinkas is offline
 
Join Date: Jan 2005
Location: Venice, Fl
Posts: 1,022
Default

Try running a temporary separate ground wire from the sender to the panel grounds/tree and not locally at the wing root. A lot of gauge/sender problems come from grounding issues. Cheap and easy enough to help diagnose the problem. Just my 2 cents....
__________________
Gary Palinkas - Gman.... VAF #161
Venice, Fl
RV-6 "Sassy" Flying 400 hrs since Oct 2011
Lycoming 0-360 A1A, FP Sensenich Prop
SARL #19 .... Van's Calendar March 2015
Although exempt several ways, =VAF= Dues paid to support this awesome site/family
Reply With Quote
  #3  
Old 02-04-2014, 06:17 PM
ARJAY ARJAY is offline
 
Join Date: Jan 2014
Location: Evansville, In.
Posts: 30
Default ERATIC GUAGE

I switched the good gauge wires to the bad one. The eraticity, (is that a word) was the same so I ordered a new one.
Thanks for all the suggestions.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:32 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.