I have a Navworx ADS600-EXP being fed by a KT76A through a TransMon.
This equipment was installed on 05/06/2016 and has worked without issues for 36 flight hours.
In the past, I had requested a few ADS-B reports and all came back with no issues.
I just recently requested another ADSB report using the following link:
[email protected]
Here is the message that I received back that it failed to generate a report.
*****************************************************************
Your Performance Report request for Tail Number N812BM on 5/04/2017 failed to generate a result.
If you believe this is an error, please respond to
[email protected] and include the following information:
1. Aircraft registration number and flight identification code,
2. Flight date and time,
3. Make/model of ADS-B transmitter and GPS, and
4. Any ADS-B avionics operating abnormalities observed or reported during the associated flight.
*****************************************************************
I submitted the requested info and got the following reply a couple of days later.
///////////////////////////////////////////////////////////////////////////////
Please see link and contact Navworx.
http://www.aviationconsumer.com/issues/49_1/industrynews/NavWorx-ADS-B_7018-1.html
Additional ADS-B information can be found here:
www.faa.gov/nextgen/equipadsb
Provided by:
Federal Aviation Administration
Flight Standards Division
Avionics Branch (AFS-360)
Washington, DC
///////////////////////////////////////////////////////////////////////////////
So bottom line is, at present my system is working fine but can't get an ADS-B report ????
The FAA reply refers me to the document about the FAA and Navworx debacle.
So there you have it from another Navworx dazed and confused customer
Bill