Zero4Zulu
Well Known Member
I have been working on my panel design for a while and now that HDX is now available I have it placed in my 3D CAD design. The new Knob and Button area that is angled outward, sticks out almost a 1.25" from the panel. (More than desirable). I have rows of toggle switches and switch guards below the HDX units and they are some what obscured by this.
I have changed my design with the HDX units set back into the panel .375" with a Z shape bracket to mount the HDX and it looks much better. The width of the Dynon CAD model shows the HDX bezel to be 10.315". I want the panel opening to fit nicely so I'm wondering if the actual HDX bezel is close to this size. Does anybody have a Dynon HDX that can measure the overall width pretty accurately?
I would like to cut my panel soon and plan to order my Dynon stuff later this summer.
Thanks.
Steve
I have changed my design with the HDX units set back into the panel .375" with a Z shape bracket to mount the HDX and it looks much better. The width of the Dynon CAD model shows the HDX bezel to be 10.315". I want the panel opening to fit nicely so I'm wondering if the actual HDX bezel is close to this size. Does anybody have a Dynon HDX that can measure the overall width pretty accurately?
I would like to cut my panel soon and plan to order my Dynon stuff later this summer.
Thanks.
Steve