This request only pertains to RV-12 Matco main gear wheels.
I'm looking into possibly purchasing a bluetooth trike tire pressure monitoring system manufactured by FOB. Below is a link to the product.
https://my-fobo.com/Product/TRIKE2#feature
The product specifications state the sensor is .8" in diameter ... which means .4" radius from the center of the valve stem. My photos of the wheel would suggest that is just about all the clearance there is between the wheel and the valve stem .... in addition, the manufacturer also suggests an additional 1/8" of clearance.
Rather not to go through the hassle of removing my wheel pants just to take one measurement ... so I'm hoping a builder/owner of a RV-12 without wheel pants can kindly take a measurement for me
I need to know the distance from the center of the valve stem to the wheel.
I'm looking into possibly purchasing a bluetooth trike tire pressure monitoring system manufactured by FOB. Below is a link to the product.
https://my-fobo.com/Product/TRIKE2#feature
The product specifications state the sensor is .8" in diameter ... which means .4" radius from the center of the valve stem. My photos of the wheel would suggest that is just about all the clearance there is between the wheel and the valve stem .... in addition, the manufacturer also suggests an additional 1/8" of clearance.
Rather not to go through the hassle of removing my wheel pants just to take one measurement ... so I'm hoping a builder/owner of a RV-12 without wheel pants can kindly take a measurement for me
I need to know the distance from the center of the valve stem to the wheel.
Last edited: