BOHICA
Well Known Member
I am at the point of making the elevator trim tab. I have my ribs Pro-Sealed in. Step 6 is to Rivet the E-01406 Trim Tab Top Skin to the E-01405 Trim Tab Spar and aft half of the Trim Tab Hinge. I can't get a squeezer in that space with the hinge in the way with my 2in thin nose yoke as the hinge would get bent and I can't get an angle on it with a bucking bar.
Any hints? The Pro-Seal is drying.
Any hints? The Pro-Seal is drying.