We're on a decent clip, vertical, rudder and horizontal finished in 28 days. Ready to buck rivets on the elevator and have a problem. Have viewed many pictures and have seen the back end of the E-913 install over and under the E-1001A and E-1001B skins. If the E-913 is installed over the skin it is in trail and the skin is smooth but leaves a funny look. If installed under the E-1001 skins it looks better but leaves a hump in the metal. Which is correct? I've looked at the pictures in the elevator section and also the empennage attach section, many pictures of airplanes and it is still confusing. Need to hear from guys that have built their 10's already. Thanks for the help.
Don Oltman
Don Oltman