What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Dynon D180/Lyc 0-360 A-4A

T

Terry Wendling

I'm New Here
Is there a PORT for manifold pressure on this engine? It's an up draft, carb-ed engine with a f/p prop. I realize that one does not usually have this info on this engine, except the Dynon D-180 likes this info so it can do some stuff like % of power indications. I have not found a port for this and wondering what you do if there is not a port for MP.
 
It's there...

Terry Wendling said:
Is there a PORT for manifold pressure on this engine? It's an up draft, carb-ed engine with a f/p prop. I realize that one does not usually have this info on this engine, except the Dynon D-180 likes this info so it can do some stuff like % of power indications. I have not found a port for this and wondering what you do if there is not a port for MP.
Click to expand...

Terry,

It's on the cylinder head... remove one of the primer lines if you have four... if you only have three, it's on the other cylinder in the same location....

gil A
 
You must log in or register to reply here.
Back
Top