I'd appreciate some input for those with SL30's on G3X.
In a previous post I mentioned that I have SL30's where the NAV can tune standby but not COMMs standby. It appears the only thing left is to determine which firmware versions have been seen to fully work (can tune both nav and comms standby) and which versions do not work (such as mine). One additional data point that would be helpful;
Did you have a non-working config like mine that was fixed by a firmware update on the SL30? (Note: G3X firmware does not appear to be a factor).
My firmware on the SL30 is
On the SL 30
NAV 1.10
COM 2.1
DSP 1.10
Please let me know what firmware you have and if you can tune NAV and COMM standby. I'll put together a table.
Thanks.
In a previous post I mentioned that I have SL30's where the NAV can tune standby but not COMMs standby. It appears the only thing left is to determine which firmware versions have been seen to fully work (can tune both nav and comms standby) and which versions do not work (such as mine). One additional data point that would be helpful;
Did you have a non-working config like mine that was fixed by a firmware update on the SL30? (Note: G3X firmware does not appear to be a factor).
My firmware on the SL30 is
On the SL 30
NAV 1.10
COM 2.1
DSP 1.10
Please let me know what firmware you have and if you can tune NAV and COMM standby. I'll put together a table.
Thanks.