Crow Harness unboxing
Today UPS delivered the Crow Safety Gear harnesses for my RV-6A and here are some close-up photos and info. Hopefully this may help someone, as I wasn't able to find any detailed pics when I was researching what harnesses to buy. I'm happy with what I received, these look strong and functional, just like an RV.
Shipping took 1 week from Nevada to Western Australia via UPS, about $130, which is typical shipping cost these days.
Each harness weighs 4 lbs. The mounting point holes are 1/4" for the shoulders and waist and 5/16" for the crotch, so they should bolt in without any modification. The crotch strap belt loop measures 5/32" thick vs the gap in the mounting bracket per Vans drawing that specifies 3/32". I haven't fitted it yet and it may not be an issue since the loop may be able to go under the floor.
Paul vS (yes I'm also a Van)
Building RV-6A #22320 O-320 FP. Wings and tail complete, fuselage almost done, working on canopy.
Flying my Aeroprakt A-22 STOL and the aero club's RV-9A while I build