david.perl
Well Known Member
hi
Ive been flying my RV7 with a vpx pro with no issues for 300 hours
after a 2month lockdown hiatus i flew the aircraft a couple of times
ive got an odd condition developed
the transponder shows a short fault when the engine is below 1000rpm and when i switch on the LED nav/strobe and landing lights
if i reset in the air and the turn the lights on, the TX stays on
on landing, when cutting the engine to below 1000rpm it trips again
voltage on alternator is steady at 14.5volts
only thing new in last few months is i installed an ADSB conspicuity device
any suggestions?
Ive been flying my RV7 with a vpx pro with no issues for 300 hours
after a 2month lockdown hiatus i flew the aircraft a couple of times
ive got an odd condition developed
the transponder shows a short fault when the engine is below 1000rpm and when i switch on the LED nav/strobe and landing lights
if i reset in the air and the turn the lights on, the TX stays on
on landing, when cutting the engine to below 1000rpm it trips again
voltage on alternator is steady at 14.5volts
only thing new in last few months is i installed an ADSB conspicuity device
any suggestions?