BobbyLucas
Well Known Member
Page 28iS/U-02...
Step 4 has you clamp the torque tube assembly to the work surface and then lock the rudder pedals into the neutral position. The result is that the rudder pedals are not vertical, i.e. not perpendicular to the work surface, rather they are canted in toward each other at ~4.5-6 degrees from vertical.
Step 6 then says "Use a square to make sure both the WD-1209 and WD-01206-1 are vertical (or perpendicular to the work surface), then clamp the brake pedals to the rudder pedals as shown."
As described in step 4, the setup does not allow the rudder pedals to be "vertical (or perpendicular to the work surface)."
So were we meant to unclamp the assy from the work surface in order to align everything vertical with a square, so that the brake and rudder pedals are parallel?
Or are the brake pedals supposed to be vertical while the rudder pedals are canted-in, resulting in the brake pedals not being parallel with the rudder pedals?
...or is the neutral angle of the brake pedals a matter of comfort/preference?
Step 4 has you clamp the torque tube assembly to the work surface and then lock the rudder pedals into the neutral position. The result is that the rudder pedals are not vertical, i.e. not perpendicular to the work surface, rather they are canted in toward each other at ~4.5-6 degrees from vertical.
Step 6 then says "Use a square to make sure both the WD-1209 and WD-01206-1 are vertical (or perpendicular to the work surface), then clamp the brake pedals to the rudder pedals as shown."
As described in step 4, the setup does not allow the rudder pedals to be "vertical (or perpendicular to the work surface)."
So were we meant to unclamp the assy from the work surface in order to align everything vertical with a square, so that the brake and rudder pedals are parallel?
Or are the brake pedals supposed to be vertical while the rudder pedals are canted-in, resulting in the brake pedals not being parallel with the rudder pedals?
...or is the neutral angle of the brake pedals a matter of comfort/preference?