VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 07-15-2011, 11:14 AM
Ironflight's Avatar
Ironflight Ironflight is offline
VAF Moderator / Line Boy
 
Join Date: Jan 2005
Location: Dayton, NV
Posts: 12,795
Default Dynon ?Legacy? (D-Series) EFIS Survival Tips

A famously skilled RV pilot has just asked to borrow your airplane. There are no issues with insurance, and you have no reservations whatsoever about giving him the controls. Yet, you are slightly worried because ? alas ? he has never operated the type of Glass Cockpit equipment you have installed. Afraid that he might run in to one of those little ?traps? that all complex software systems exhibit to the uninitiated, you take a few moments to brief him on the top ten ?tricks? you have learned that make flying with your personal EFIS easy and stress-free. We all learn short-cuts and signatures that help us more than the structured manuals ever could - now it is time to share those tips with the rest of the world!

If you have more than a few hours behind the Dynon EFIS, how about listing a few of the items you?d share with the finest pilot you?ve ever met if he (or she) was going to fly your plane.

Paul
__________________
Paul F. Dye
Editor at Large - KITPLANES Magazine
RV-8 - N188PD - "Valkyrie"
RV-6 (By Marriage) - N164MS - "Mikey"
RV-3B - N13PL - "Tsamsiyu"
A&P, EAA Tech Counselor/Flight Advisor
Dayton Valley Airpark (A34)
http://Ironflight.com
Reply With Quote
  #2  
Old 07-15-2011, 12:07 PM
Louise Hose's Avatar
Louise Hose Louise Hose is offline
 
Join Date: Sep 2005
Location: Dayton, Nevada --- A34
Posts: 1,469
Default Just keep pushing buttons

Since there are no labels, just start by pushing any button. Then, look at the option labels at the bottom of the screen.

The outside two buttons change the screens. Keep pushing until you find the screen setup you want.

If you want to go to the previous screen, hit the outside button on the opposite side from the one that brought you there.

Interior buttons lead to sub-menus. Mine down until you find what you want.
__________________
Louise Hose, Editor of The Homebuilder's Portal by KITPLANES
RV3B, NX13PL "Tsamsiyu" co-builder, TMXIO-320, test platform Legacy G3X/TruTrak avionics suite
RV-6 ?Mikey? (purchased flying) ? Garmin test platform (G3X Touch, GS28 autopilot servos, GTN650 GPS/Nav/Comm,
GNC255 Nav/Com, GA240 audio panel)
RV8, N188PD "Valkyrie" (by marriage)
Reply With Quote
  #3  
Old 07-15-2011, 12:17 PM
Sam Buchanan's Avatar
Sam Buchanan Sam Buchanan is offline
been here awhile
 
Join Date: Dec 2004
Location: North Alabama
Posts: 4,455
Default D-10A

I'd show the pilot how to set the barometer, and that's about it. As Louise stated, he could have figured that out on his own. Everything else needed to complete the flight is already displayed. If he wanted to see the HSI, the simple button push (outside right) to switch between EFIS and HSI could be demonstrated.

These aren't tricks, they are in the manual. The D10-A is a very straightforward device.....probably why it is so popular.
__________________
Sam Buchanan
RV-6
Fokker D.VII replica

Last edited by Sam Buchanan : 07-15-2011 at 12:20 PM.
Reply With Quote
  #4  
Old 02-01-2013, 07:32 AM
DennisRhodes DennisRhodes is offline
 
Join Date: Jul 2007
Location: Taylorsville, Ga
Posts: 876
Default On a D 180

Don't hit any buttons after the master is turned off and the unit will go to back up battery , then power off on its own . If you touch anything during that power down time it will just remain on until the internal battery is depleted. Assuming you have the " excellent " shut down feature activated.
__________________
DRRhodes
2021 VAF Supporter
RV9 N908DR
Reply With Quote
  #5  
Old 02-01-2013, 09:02 AM
Neal@F14's Avatar
Neal@F14 Neal@F14 is offline
 
Join Date: Aug 2007
Location: Wichita Falls, TX
Posts: 2,182
Default

Check whether the airspeed is set to display in MPH or knots
__________________
Neal Howard
Airplaneless once again...
Reply With Quote
  #6  
Old 07-20-2017, 12:12 PM
BruceMe's Avatar
BruceMe BruceMe is offline
 
Join Date: Feb 2005
Location: Shawnee, Kansas
Posts: 817
Default

I had this same thing happend last weekend. I purchased a D10 for my RV-4 in 2006. I installed it and flew it in that plane for years until I upgraded to G3X. Similar situation, but not the same. Well... I sold the Dynon to my partner, he used it in an RV-6A, then did a simlar upgrade and sold it back to me to upgrade the steam attitude/dg in an RV-6 repair project.

So I'm flying both right now and of course steam in anything else (mostly 172). Showing the plane, I had the buyer asked how to use it.

I gave him an overview of the layout... went around the visible display showing what each section meant. It will help to fly any flight simulator as they all have an airplane with glass. My Dynon also has the AoA so I also had to explain what that is, how it works and how to fly using it safely. And finally I showed him how to set the baro. The rest you can discover with the manual or just clicking around (it's quite simple).

Now the G3X... different story. Two redundant screens that work together to integrated engine monitoring, fuel system, autopilot, transponder, transmitter, navigation as well as basic flight. There's a nautical s-ton, of not always intuitive, menus to learn there. I don't think I'd just let a steam guy lose on a G3X if they weren't at least minimally trained on the ground.

The older D10 is trivial, learn the new symbology and fly the plane.

Did that help?
__________________
Bruce Meacham

Building RV-4A 18ZM
Built/Own RV-4 254MM
First RV RV-3 3456B

VAF annual donation on autopay
Reply With Quote
  #7  
Old 12-09-2019, 09:49 AM
gmcjetpilot's Avatar
gmcjetpilot gmcjetpilot is offline
 
Join Date: Jan 2005
Posts: 4,512
Default

Quote:
Originally Posted by Ironflight View Post
If you have more than a few hours behind the Dynon EFIS, how about listing a few of the items you’d share with the finest pilot you’ve ever met if he (or she) was going to fly your plane. Paul
Appreciate your respect for this pilot and letting them fly your plane. One word "TRAINING". If a pilot is a superior airman, explaining this issue and asking them read manuals and do ground training to learn all the functions, is the least you should do. I would fly with them at least once to make sure they are comfortable.

You are wise to not let anyone fly your glass panel who has no experience with that system.... or glass in general. The old steam gauge days, with a couple of King NAV/COMS was a simple time. As a CFI I flew from a of about 30 planes. They were all similar and yet different. Then GPS started showing up and I had to learn how to use those. Now that glass has shown up in GA if you are not familiar with that system you need training (even if FAR's are not strict about this). Today GA, Business, Airliner... it may take days or weeks of ground school, simulator, line checks in order to master the buttons and displays of new glass.... .

If they are going to fly IFR, if that were in play, a complete proficiency check would be needed IMHO.
__________________
George
Raleigh, NC Area
RV-4, RV-7, ATP, CFII, MEI, 737/757/767

2021 Dues Paid

Last edited by gmcjetpilot : 12-09-2019 at 09:51 AM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:54 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.