Hi, I had an oil pressure sensor rated 150psi and a fuel pressure sensor rated 50psi on my RV7 with fuel injected engine and Dynon Skyview. Both sensors were concerned by the SB so I decided to change them and the recommandation was to replace both by new 150 psi sensors.
Now my oil pressure reads normal but the fuel pressure reads one third of the actual pressure. How do I modify the settings to tell skyview that the fuel pressure sensor is now a 150 psi and not a 50 psi anymore, Thank you for your help, Nicolas F-PANI RV7 France
Now my oil pressure reads normal but the fuel pressure reads one third of the actual pressure. How do I modify the settings to tell skyview that the fuel pressure sensor is now a 150 psi and not a 50 psi anymore, Thank you for your help, Nicolas F-PANI RV7 France